Martinsville traditional persian rugs


What Does Handmade Mean?

Handmade can mean many things. Price and quality depend on a number of factors in Martinsville.
Hand tufted: A tufted rug is made using a mechanical tufting tool that secures and inserts the yarns in the backing, often canvas. Since the tufted yarns are not securely enclosed by a knot, the backs of these rugs are usually sprayed or painted with adhesives to secure the pile yarn. These rugs cannot be truly called “Oriental rugs.”
Hand knotted: In a hand-knotted rug, each yarn is individually tied in a knot by the weaver. Each knot of yarn is tied securely around two or three strands of warp yarn, which is the vertical yarn set up initially on the loom as the basis for the rug that will be woven upon it. This is a completely handmade process, no mechanical tools are used.
A hand-knotted area rug will be more expensive than a tufted rug. In addition, a hand-knotted rug made in the crossed style of weaving is more time-consuming and durable (and expensive) than an uncrossed rug.
Shearing: After the rug is woven, overall shearing of the pile is done by hand, to an even depth or to variations of textural depth specified by the designer. Shapes within the overall design are usually incised, cut around carefully by hand to create dimension and clarity of design.
Knot count: This term refers to “knots per square inch.” The more detailed and complex the design, and the finer/thinner the wool, the more knots are required for clarity of color and design. High-quality rugs usually range from 50 to 100 knots per inch. Imagine the work that goes into that kind of hand weaving. Knot density will affect the cost of the rug.
rugs direct

Martinsville

Guide to Oriental Rugs

You can make a custom, large-scale graphic area rug for your small space. Just follow these easy step-by-step instructions.
Those living in small spaces often turn to designers to help them maximize every inch of room. Beyond skilled allocation of space, designers can recommend techniques to trick the eye; for example, taking focus off a room's shortcomings and redirecting attention to carefully selected focal points such as area rugs. Designers know that smaller, modest-sized spaces can be extra challenging to furnish since most ready-made pieces are out of proportion with small-scale dimensions. To ensure key pieces will scale correctly for small spaces, it's wise to think outside of the box, creating something custom made to fit when possible. One of the easiest ways to do this is to transform ready-made area rugs into a perfectly sized custom rug.
The key to getting a custom look from off-the-shelf area rugs is to combine several together, giving the appearance of a large, custom-sized version. While this project is easy to do, success depends on selecting the right materials - not just any area rug will work. Solids are easy to use; depending on the rug's material, however, seams may appear prominent and detract from the intended illusion of one large solid piece. Textural rugs such as shag are often the best choice since the loose fibers of the shag hide the seams between each rug. Rugs with large-scale patterns make the most visual impact, especially since introducing a pattern into a cramped space can take focus off the lack of square footage and attract it to the bold pattern.
In order to successfully blend multiple area rugs with bold patterns, there are important details to keep in mind. First, be aware of where a rug's pattern repeat begins and ends. Lay several of the same style rugs out flat on the ground. If the repeat starts and ends in the same portion of each rug, this means they will match up seamlessly once strung together. On the other hand, if the pattern repeat is inconsistent among several of the same rugs, it's best not to use it. A few styles that are usually simple to match up include: plaid, stripes, zigzags and large-scale botanicals.
To add the look of a custom, large-scale graphic area rug in your own small space, follow these step-by-step instructions.

Materials Needed:

  • several area rugs with large-scale repeats
  • tape measure
  • painter's tape
  • duct tape or carpet tape
  • pencil
  • notepad

Measure Area

Use a tape measure to determine the dimensions of the floor surface the rug is intended to cover. Keep in mind that the area rug should sit at least six inches underneath furniture, particularly sofas, to give the illusion that the rug extends all the way to the wall. Jot dimensions down on notepad with pencil.

Mock Up With Painter's Tape

Referring to the notepad, tape off the floor in same dimensions as planned for the rug area. With tape laid out, stand back and confirm the rug encompasses all main furniture pieces, including sofas, tables and armchairs. TIP: The more surface area covered by the rug, the more likely it is to take focus away from a room's shortcomings.

Fit Rugs to Mocked-Up Area

Unroll each rug, then lay them out side-by-side to ensure they properly fit inside the mocked up area. TIP: Many rugs are off by half an inch to two inches. If the span falls short or runs over the allotted space, reposition tape to reflect the exact parameters.

Identify Pattern Repeat

With all rugs laid side-by-side, next identify where the pattern repeat matches up on each rug. To do this, you may need to rotate each rug several times.

Match Up Repeats

Once the proper spot of each rug pattern's repeat is identified, lay out all rugs together. Confirm the pattern repeat seamlessly runs from one end of the area rug to the other.

Tape Rugs From Side to Side

With the help of a friend, flip carpets over carefully to ensure they say in position so that the pattern repeat matches up. Add duct tape across the back of each rug horizontally.

Tape Seams

Now that the rugs are held together side-by-side, firmly add duct tape along the seams where each rug meets.

Check for Inconsistencies

It's likely that there will be a few areas in which the pattern repeat is slightly off. Identify any inconsistencies before deciding on final placement of the rug; assign inconsistent spots to inconspicuous areas such as under a sofa or against a wall.

Walk on Seams

With the custom area rug in place, walk back and forth along the seams several times to push fibers down, helping to create more of a seamless look.

Place Furniture

Arrange furniture on area rug, then stand back and confirm the pattern repeat reads correctly. Try to place furniture so that the parameter of the rug fully encompasses all furnishings. If that's not possible, aim to have at least the front legs of furniture sitting on the rug, with at least six inches of the rug tucked underneath each piece of furniture.

Braided Towel Rug

house of rugs We are going to talk about vintage rugs, and vintage rugs is a very unique product that's really popular today. A lot of people think that vintage rugs arerugs that were old rugs that are aged and have been around for a long time and theyare basically antiques, or maybe they are not antiques or…they really don't know what the difference between a vintage rug and an antique rug is. A vintage rug is a rug that's made to look old. It has what we call a vintage -- like in jeanstoday where they'll wear it out and make it look like it's been, you know, around fora hundred years and it's got holes in it and things of that nature. Where, in a rug, basically what we do is wetake an old Persian rug -- usually, I mean it could be any rug, it doesn't have to bethat, it could be a machine made rug, it doesn’t really matter -- basically we shear it downto the back so it's almost zero pile. We’ll will take it and then we’ll stripthe color. Usually it's some kind of caustic or chemicalsthat we use in order to strip the color out, so once you get done, it’s a rug that basicallyhas no color in it. It's just basically shadows of grays and brownsmostly, and maybe hints or hues of blues and blacks, that kind of show the design whichwas woven into it originally. You have taken a perfectly brand new rug,very bright and colorful, and you have taken all the color out of it that point. Then there's also a process that we do alsowhat we call over-dyeing, and that can also be part of that vintage look. The rug behind me is an example of basicallya vintage rug that's been over-dyed. So we’ve take a 30-year old Persian rug,and basically what we've done is stripped it down, sheared it, recolored it to makeit more into today's world. It is so popular, I can't even explain howpopular it is. Mainly because it looks so real, it looksso worn, it looks so inviting, and also it's just a dream to decorate around. You can imagine that you're not like mostoriental rugs with a lot of patterns and color, you know, popping off the rug. This is a rug that's very subtle and you backoff of it 10 to 15 feet into the room, you really don't even see the pattern. You just see the beautiful warmth of the coloringand the irregularities to those colorings. What you are seeing in the back, the whitestuff, that is actually the foundation of the rug popping through, because again youare at zero pile, so there's little imperfections that happen because of that. Also, there are also some damages done tothat as well, so we correct those damages as best that can be done, and so part of thevintage thing is to have those holes in them or wornness in them or repairs in them. Either you get it or you don't, I always havecustomers who get it home and they'll realize, ''Hey, it looks like it's been repaired”. Yes, it has, and it's been done professionally,it's going to hold up, but a lot of people are saying, ''I want my money back''. I can understand that too, and we unfortunatelyhave to accept that that is part of them not understanding the product, and we didn't reallyexplain it enough, but it really is a gorgeous product that allows us to take rugs that are…notselling, basically, and convert them into a very popular, hot item, that has a lot of appeal. So that's what a vintage rug or an over-dyedrug can be.

Texas search for area rugs